RUBIO MONOCOAT: VOC-free oil for floors and furniture
Rubio Monocoats products comply with the following criteria:
PRODUCTS
RMC OIL PLUS 2C
Rubio Monocoat Oil Plus 2C is a dual component oil for outdoor application on wood, consisting of RMC Oil Plus (A) and RMC accelerator (B). Rubio Monocoat Oil Plus 2C is applied in one layer making it very suitable for treating indoor applications that require quick drying.
This product is extremely suitable for industrial applications, both with oxidative and UV processes.
PACKAGE:
Combined can of 1,3 I: 1 I RMC Oil Plus and 0,3 l RMC Accelerator.
Combined can of 3,5 I: 2,750 I RMC Oil Plus and 0,750 I RMC Accelerator.
Rubio Monocoat Fumed
Rubio Monocoat Fumed, has been developed to create a special effect on Oak and Ash.
Since this product reacts in accordance to the amount of tannic acid that is present in the wood, this treatment allows to create very unique and personilised effects.
Rubio Monocoat Smoke
Rubio Monocoat Smoke has been especially developed to provide an ammonia smoked aspect to Oak or Ash.
Since this product reacts in accordance to the amount of tannic acid that is present in the used wood, this treatment allows to creat a very unique and personilised effect also.
SPECIFIC CHARACTERISTICS:
PACKAGE:
250ml
1 litre
5 litre can
TECHNICAL CHARACTERISTICS:
Physical state (20°C): liquid
Colour: colourless
Odour: specific
Solubility in water: mixable
STORAGE:
The product can be stored for up to 12 months. Store in dry conditionsand in the original packaging. Keep away from frost
DIRECTIONS FOR MANUAL APPLICATION:
- Sand the planks until the desired effect has been reached
- Remove any dust
- Apply either RMC Fumed or Smoke regularly using a roller or a brush. If a smoth effect is required saturate the surface completely with the product
For RMC FUMED - wash off the excess of the product with water and a sponge, go over the surface and wring the sponge with the absorbed product out in the second bucket
- Let the surface dry completely (12 to 48hrs)
- Sandpaper the surface lightly with a polisher equipped with a beige pad
- Remove any dust again
- Finish with Rubio Monocoat Oil
DIRECTIONS FOR INDUSTRIAL APPLICATION:
- Sand the planks until the desired effect has been reached
- Remove any dust
- Apply either RMC Fumed or Smoke regularly using a roller or a spray gun. If a smooth effectis required saturate the surface completely with the product
- Let the surface dry completely - to the air, with a drying tunnelor UV drying
- Sand the surface lightly with a brushsanding machine, flutter or nylon
- Remove any dust again
- Finish with Rubio Monocoat Oil
MAINTAINANCE
Rubio Monocoat Refresh Spray
RMC Refresh Spray is a ready-to-use product, in spray or can, that refreshes, restores and protects surfacestreated with Rubio Monocoat Oil Plus.
RMC Refresh is used when the surface feels to dry or rough, or when the finish has worn off due to heavy traffic. Rubio Monocoat Refresh is just as effective when used on other oiled or varnished surfaces.
PACKAGING: 400ml spray bottle
Rubio Monocoat Soap
Rubio Monocoat Soap is used to clean treated parquet. Surfaces treated with Rubio Monocoat Oil Plus can be cleaned weekly with a solution of 150ml RMC Soap per bucket of water (10L)
Weekly maintainance with RMC Soap gives your floor a matt finish.
Rubio Monocoat Soap Satin
Rubio Monocoat Satin is used to clean treated parquet. The addition of a microscopic layer of satin gloss improves protection and intensifies the finish.
PACKAGING: 1 and 2 litre bottles
