Underlay Range for floating/laminate floor 1. Premium Combi-Lay Premium Combi-Lay is a good quality, medium density polyolefin underlay for all floating floor applications. It incorporates a continuous clear damp-proof with 100 mm overlap and integrated ?peel and stick?. The inclusion of a continuous damp proof is a requirement under most floating floor installations. With Premium combi-lay, the need for additional damp proof layers is almost always avoided*, making installations quicker and more cost effective. Premium Combi-Lay combines the right balance of compression, slip and damp proof characteristics into one affordable package. Premium Combi-Lay Benefits:
Specification:
2. Premium Quiet-Step Combi-Lay Quiet-Step Combi-Lay is a superior underlay, where reduced foot noise and sound reduction in multi-story buildings are required. It is made of high density polyolefin copolymer resin which effectively reduces the hollow and often ?clunky? foot noise associated with floating floors. Quiet-Step Combi-Lay addresses this key negative of floating floor installations, while performing all the tasks of a superior quality underlay including a continuous damp proof*. Quiet-Step is the first floating floor underlay in Australia to take foot noise seriously. Independent University tests show a 30 % or more reduction in foot noise for the user, while the underlay has achieved an excellent L'nw + C1 = 49. The integrated damp proof removes the need for additional damp proof layers in most instances*, while the products strength and lay flat characteristics make it a pleasure to install. Quiet-Step Combi-Lay Benefits
Specification:
*Both Premium and Quiet-Step Combi-Lay are available without damp proof for those applications where 200 um plastic is to be used or where a damp proof is not deemed necessary. Always seek manufacturer's guidelines. Premium Floors recommends continuous damp proof for all floating floor installations over concrete and wood floors directly above ground. Continuous damp proofing requires taping of roll end joints. Heated floors and knowingly or logically wet floors require separate 200 um plastic barrier with 300 mm overlap and turn up at walls. Other options are: Regupol - Impact Sound Acoustic Underlay Range Versatile resilient underlay for every floor covering With the ever increasing demand for hard floor surfaces such as parquetry, strip timber, ceramics, marble, stone and granite comes the need to provide sufficient impact sound isolation. For this reason there is impact sound insulation by Regupol which is far more effective than demanded by the standard. To preserve serenity and peace in sensitive areas, impact noise must be controlled to suitable levels. The most common impact sound problem is footfall noise transferring from floor to floor in all types of buildings. Regupol impact sound insulation is easy to install, has a low system height (2-6 mm) and is durably resistant. It does not matter which final surface comes on top of sound insulation underlay. Surface noise in the frequency range between 500 and 2,000 Hz is reduced by 25 %. Advantages:
There is a different range of products with different thickness in impact sound insulation, for more information contact our showroom. |
|
|
|||